Selected option 02 from the wordmark comparison. Reconstructed vector lineage; not a recovered original font. Geometry preserved exactly from the selected review artwork. Forest/ivory are brand colors; black/white are utility monochrome exports. The small U bottom overshoot remains.

For panel shops and trade customers: estimators, parts and panel staff

Before you send us a wheel

Some wheels we can't repair. Sending one means freight both ways and a delay to your job. Check this page before a wheel leaves your site. If you are not sure, send us photos first and we will tell you yes or no.

At a glance

Everything else: send it as normal. Not sure? Send photos first.

How to send photos first

Three photos tell us almost everything. Clean the damaged area first and take them in good light: dirt or a blurry photo can hide a crack.

  1. 1 The whole wheel faceStraight on, with the whole wheel in the frame.
  2. 2 A close-up of the damageFill the frame. Take one for each damaged spot.
  3. 3 The inside of the barrelThe back of the wheel behind the damage, if the wheel is off the car. Bends and cracks can show on the inside too.

Send them to: office@depuluwheels.com

With the photos, tell us:

  • your site, and your job or purchase order number;
  • the finish, if you know it (for example chrome, polished or powder coat).

What happens next

We reply with one of three answers.

The wheels in detail

Each card shows a simple drawing of the problem beside a real wheel from our workshop records, with the damage circled in red.

1

Twisted through the centre

Do not send
Side view of two wheels. Left: a true wheel, square to the axle. Right: a wheel twisted through the centre: the centre that bolts to the car is bent, so the whole rim sits at an angle and wobbles all the way round.A true wheelsquare to the axleTwisted through the centrethe rim sits atan angle andwobbles all theway roundthe centre, where itbolts on, is bentside view; angle exaggerated
What is happening to the wheel

No photo here on purpose. A twist often does not show in a photo. Check how the wheel turns instead.

What happened
A hard hit has bent the centre of the wheel, where it bolts to the car. The whole rim now sits at an angle.
Why we can't repair it
In our experience it cannot be straightened.
What to look for
Spin the wheel. If it wobbles all the way round, not only at the damaged spot, it is likely twisted.
2

Crack through or next to a spoke

Do not send
Front view of a five-spoke wheel with two cracks marked in red: one across a spoke, and one where a spoke meets the rim.crack througha spokecrack where a spokemeets the rim
What is happening to the wheel
A crack through a spoke. The red circle is on the original photo.
A crack through a spoke. The red circle is on the original photo.
What happened
The metal has split across a spoke, or where a spoke meets the rim.
Why we can't repair it
It is not safe to repair.
What to look for
A fine dark line across a spoke or at its ends. Clean the area and look closely. Do not refit a wheel you think is cracked.
3

Stress marks next to a spoke

Send photos first
Close-up of a wheel where a spoke meets the rim edge. The rim edge is bent in right next to the spoke, and fine stress marks show in the metal at the join. A small whole wheel shows where the close-up is.rim edge bent in,right next toa spokefine stress markswhere the spokemeets the rimwhereon thewheelclose-up of the rim edge
What is happening to the wheel
Damage on the rim edge right where a spoke meets it. Look closely here for fine stress marks.
Damage on the rim edge right where a spoke meets it. Look closely here for fine stress marks.
What happened
The rim edge is bent right next to a spoke, and the metal there shows stress marks. It is already under a lot of stress.
Why we can't repair it
The wheel will probably crack during the repair, so we usually cannot repair it safely.
What to look for
Fine marks in the paint or metal where a bent rim edge meets a spoke. Send us a close-up photo before you send the wheel.
4

A finish we can't match, or that takes much longer

Sign for each finish
Two wheels with the same repair. On a painted wheel the repair is painted over and matches. On a milled or powder-coated wheel the repair leaves a patch that does not match.Painted wheelSpecial finishrepaired and repainted:it matchesrepaired: the patch doesnot match the finish
The same repair on two wheels

The damage itself is often something we could repair. The problem is the finish. Chrome we cannot repair at all. Anodised and polished wheels we can do, but they take a lot longer than our normal repair. On the others, our repair would leave a patch that does not match.

Each finish is below, with its own sign.

Plated chrome. The scrape on its rim edge is not the problem: the chrome finish is.
Plated chrome. The scrape on its rim edge is not the problem: the chrome finish is.
4A

Plated chrome

Do not send
How to spot it
A true mirror shine, not silver-grey paint. A chip may show a copper or yellow tint at its edge.
Why we can't repair it
We cannot repair chrome finished wheels. The issue is not the damage, which on another finish we could normally repair, but the chrome itself: real metal layers (copper, nickel, chrome) built up in plating tanks. We have not found a plater who will re-chrome wheels.
What we can offer
A chrome-look repaint. It will not match the other wheels.
Vapour chrome. The scrapes on its rim edge and a spoke are not the problem: the chrome finish is.
Vapour chrome. The scrapes on its rim edge and a spoke are not the problem: the chrome finish is.

More examples

Close-up: the gouge has torn the thin mirror film into ragged, raised strands.
Close-up: the gouge has torn the thin mirror film into ragged, raised strands.
4B

Vapour chrome

Do not send
How to spot it
It looks like chrome. Where it is damaged, the clear coat may flake off over a thin bright film.
Why we can't repair it
We cannot repair chrome finished wheels. The issue is not the damage, which on another finish we could normally repair, but the chrome itself: a metal film thinner than a hair, applied in a vacuum chamber.
What we can offer
A chrome-look repaint. It will not match the other wheels.
Bright milled edges outline each spoke and window of this black wheel.
Bright milled edges outline each spoke and window of this black wheel.

More examples

A bright milled cut runs along the edge of every spoke.
A bright milled cut runs along the edge of every spoke.
4C

Milled faces or spokes

Send photos first
How to spot it
Bright cuts along the edges or sides of the spokes. A lathe-cut face is different: bright across the whole front, with fine rings round the centre.
Why we can't match it
The bright edges are cut by a milling cutter, not turned on a lathe. We cannot copy a milled finish.
What we can offer
A buckle, or damage only to the painted part, may still be repairable.
A polished wheel with deep scrapes.
A polished wheel with deep scrapes.
4D

Polished, or half painted and half polished

Send photos first
How to spot it
A mirror-bright face or lip, often beside painted parts.
What we can offer
Polishing. We can do it, but it takes a lot longer than our normal repair.
The limit
In rare examples it cannot be fixed and it stains.

No photo here on purpose. Anodising is hard to tell from paint in a photo. Check a scrape instead, as below.

4E

Anodised

Send photos first
How to spot it
A thin coloured or clear finish with no paint layers under it. A scrape shows bright bare metal straight under the colour.
Why it takes longer
A skin grown out of the metal itself in an acid bath. It cannot be touched up.
What we can offer
Anodising. It is outsourced to an external anodising company, so turnaround is typically a few weeks rather than our normal repair timeframe.
A chip in a gold powder-coated finish. The red circle is on the original photo.
A chip in a gold powder-coated finish. The red circle is on the original photo.
4F

Powder coat

Send photos first
How to spot it
A finish that is, or might be, powder coated. Send us photos before you send the wheel.
Why we can't match it
Powder is baked on in an oven. We paint in 2-pack only, so we cannot match it.
What we can offer
We repaint the wheel in 2-pack, or we repair the damage only and your powder coater recoats it.
5

A face or spokes that need a lot of welding, mainly on a machined face

Send photos first
Two machined wheels, front view. Left: deep gouges in the bright machined face, on the lip and on two spokes. Right: the same wheel after welding and cutting the face again: grey weld stains show where the welds are.Before: deep gougesAfter: weld and re-cutmetal gone: a lotof weld neededwelds show as greystains under clear coat
What is happening to the wheel
Gouges across the painted face and its bright machined edge. The weld it needs would show as a stain under the clear coat.
Gouges across the painted face and its bright machined edge. The weld it needs would show as a stain under the clear coat.

More examples

A machined spoke face and rim edge ground away to raw, torn metal.
A machined spoke face and rim edge ground away to raw, torn metal.
What happened
Deep damage to a machined face needs a lot of weld to fill it, and the welds show as stains. They show grey under the clear coat, even after we cut the face again.
Why we can't repair it
The welds show as stains, so we cannot give a factory finish. We do small welds, with a warning that a slight stain may show.
What to look for
Deep gouges, or a machined (diamond-cut) face or spoke that needs welding. Send us photos first.
6

Large pieces of metal missing

Send photos first
Front view of a wheel. Part of the outer lip has torn open: one piece is folded back over the tyre and the next piece is missing, so the rim is no longer whole.lip bent so farit tore and foldedbacka piece of metalis gone: the rim isno longer whole
What is happening to the wheel
The rim edge torn open and folded back where it meets a spoke.
The rim edge torn open and folded back where it meets a spoke.
What happened
The lip was bent so far that the metal tore. A piece is folded back or gone, so the rim is no longer whole. A tear like this can also make the wheel unsafe to repair.
Why we can't repair it
We weld small chunks back. A large missing piece can need so much weld that it shows, and the colour will not match.
What to look for
A torn, folded or missing piece of the rim edge. Send us photos before you send the wheel.
7

Plastic covers, sleeves or inserts

Cover or sleeve: do not sendInserts: send photos first
Left: a section through a wheel face with a thin plastic cover bonded on top; the cover is torn and peeling, and it cannot be repaired. Right: a wheel with plastic inserts in its windows; one insert is pulled out and cracked. A damaged insert must be replaced; the wheel can often be repaired.Plastic cover or sleevePlastic inserttorn: the covercannot be repairedplastic coverbonded onsection through the facea damagedinsert mustbe replacedthe wheelcan oftenbe repaired
What is happening to the wheel
Large black plastic inserts fitted over the centre and spokes. A damaged insert must be replaced; the wheel itself can often be repaired.
Large black plastic inserts fitted over the centre and spokes. A damaged insert must be replaced; the wheel itself can often be repaired.
What happened
A thin plastic cover is bonded over the face of the wheel, or plastic inserts are fitted to it. A torn cover cannot be repaired.
Why we can't repair it
We cannot repair a wheel with a plastic face cover or sleeve. We can often repair a wheel with inserts, but not the insert itself. A damaged insert must be replaced.
What to look for
A face that looks like chrome, with torn or flaking skin over grey metal where it is damaged. Send us photos of any plastic part or insert first.
8

Press-on bands (chrome or stainless) and fake two-piece rims

Do not send
Left: a section through a wheel lip with a thin chrome or stainless band pressed over its face; the band is dented like a can and cannot be straightened. Right: a fake two-piece wheel: a ring of bolt heads on the face, but it is one piece with no seam.Press-on bandFake two-piecethin chrome orstainless banddented like a can:it cannot bestraightenedalloy wheelunder itsection through the lipbolt headson the faceone piece,no seam
What is happening to the wheel
Bolt heads round the face, like a two-piece wheel, and a thin polished band over the lip.
Bolt heads round the face, like a two-piece wheel, and a thin polished band over the lip.

More examples

Close-up: a thin polished band over the lip, chewed and torn along its outer edge.
Close-up: a thin polished band over the lip, chewed and torn along its outer edge.
A thin chrome band pressed onto the lip.
A thin chrome band pressed onto the lip.
A steel wheel with a thin chrome band pressed onto its outer lip.
A steel wheel with a thin chrome band pressed onto its outer lip.
What happened
A thin chrome or stainless band is pressed over the lip, and it dents like a can. A fake two-piece is one casting, shaped to look like two pieces.
Why we can't repair it
We cannot straighten them or repair them to factory standard.
What to look for
A bright lip with a fine line where the band meets the paint. A fake two-piece has bolt heads on the face, but no seam and no nuts at the back.
9

Centre caps

Send photos first
Three wheel centres, each with a centre cap. Left: a broken cap, cracked with a piece broken off. Middle: a bright machined or chrome cap, which we cannot match. Right: a cap painted one plain colour, which we can sometimes do if you ask first.Brokencracked, and apiece broken offMachined or chromebright machinedor chrome: wecannot match itPainted one coloursometimes we cando this:ask first
What is happening to the wheel
The centre cap has broken out, leaving its snapped plastic ring in the hub.
The centre cap has broken out, leaving its snapped plastic ring in the hub.

More examples

The face of this cap is ground away, and its edge is chewed and broken.
The face of this cap is ground away, and its edge is chewed and broken.
A shiny brushed-metal cap, not a plain painted one.
A shiny brushed-metal cap, not a plain painted one.
A badge cap with a chrome rim and raised chrome letters, in a machined face.
A badge cap with a chrome rim and raised chrome letters, in a machined face.
What happened
The centre cap in the middle of the wheel is broken, or it has a bright machined or chrome finish.
Why we can't repair it
We cannot repair a broken cap, or refinish a machined or chrome cap to match the wheel. We can sometimes paint a cap one plain colour: ask first.
What to look for
A cracked or broken cap, or a shiny machined or chrome cap. Ask us first if you want a cap painted one colour.
10

Steel wheels with hub caps

With a hub cap: do not sendOther steel wheels: send photos first
Left: a steel wheel with its hub cap lifted off to one side; we cannot do anything with it. Right: a plain steel wheel; send photos first, because a new one is often the better choice.Steel wheel with a hub capOther steel wheelsa hub cap over asteel wheel: we can'tdo anything with itsend photos first:a new one is oftenthe better choice
What is happening to the wheel
A pressed steel wheel with a plastic hub cap over its centre.
A pressed steel wheel with a plastic hub cap over its centre.

More examples

A plain black steel wheel with a bent rim edge. The bright patches are camera glare, not chrome.
A plain black steel wheel with a bent rim edge. The bright patches are camera glare, not chrome.
What happened
The wheel is steel, not alloy. A hub cap can hide the steel wheel under it.
Why we can't repair it
We cannot do anything with a steel wheel under a hub cap. We can straighten other steel wheels, but a new one is often the better choice, so send photos first.
What to look for
A hub cap over the wheel, or a plain steel wheel. Do not send one with a hub cap. Send us photos of any other steel wheel first.
11

Stud holes that need inserts

Send photos first
Close-up of the centre of a wheel, where it bolts to the car. One stud hole is badly damaged and needs an insert. Another has only light damage around it, which we can repair.stud hole badlydamaged: it needsan insertlight damagearound a hole:we can repair thiswhereon thewheelclose-up of the stud holes
What is happening to the wheel
The back of a wheel with damaged stud holes; one is circled.
The back of a wheel with damaged stud holes; one is circled.

More examples

Close-up of one stud hole with a chewed, burred edge after the wheel came loose.
Close-up of one stud hole with a chewed, burred edge after the wheel came loose.
What happened
The stud holes, where the wheel bolts to the car, are damaged. A badly damaged hole needs a stud insert fitted.
Why we can't repair it
We do not fit stud inserts ourselves. We can send the wheel to another workshop, or tell you where to go. We can repair light damage around the stud holes.
What to look for
A stud hole that is out of round, or a worn or rough edge around it. Check both sides of the wheel and send us a close-up photo. Have the studs and wheel nuts checked too.